This plastic thru-hull mount transducer performs well at high speeds. An excellent choice for fiberglass and metal hulls, this 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating fr...
This plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls. This 8-pin 300 W transducer has a depth of 900 ft; an operating frequ...
This plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls. This 8-pin 300 W transducer has a depth of 900 ft; an operating frequ...
The best performing 1 kW in-hull, this narrow beam transducer provides crisp image detail. The transducer has a depth of 3,000'; an operating frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwid...
This plastic smart thru-hull mount transducer provides depth and temperature data to your NMEA 2000 network. This 100 W transducer has a depth of 600 ft; an operating frequency of 235 kHz; a beamwi...
This plastic thru-hull NMEA 2000® smart transducer combines precise depth, speed and temperature signals with attitude sensing for heel/trim and pitch/roll data. It can read depths to 330’ and offe...
The AIRMAR® CM599LHW is a pocket mounted transducer that utilizes low and high frequencies to send depth and temperature to your Garmin Marine network.
The AIRMAR® B75M (20° Tilt) is a bronze thru-hull transducer designed to allow both traditional & spread spectrum scanning when used with a compatible sonar.
The AIRMAR® B75M (12° Tilt) is a bronze thru-hull transducer designed to allow both traditional & spread spectrum scanning when used with a compatible sonar.
The AIRMAR® B75H (12° Tilt) is a bronze thru-hull mount transducer designed for traditional and spread spectrum scanning when used with a compatible sonar.
The AIRMAR® B75H (12° Tilt) is a bronze thru-hull mount transducer designed for traditional and spread spectrum scanning when used with a compatible sonar.
An extension of the AIRMAR® B744V triducer, this bronze thru-hull mount transducer is used for steep deadrise vessels or thick, cored hulls. This 8-pin 600 W long stem transducer has a depth of 800...
The only thru-hull transducer that offers depth, speed and temperature in one package, this 8-pin 600 W triducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth...
This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This 8-pin 500 W transducer has a depth of 900 ft; an operating frequen...
This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. An excellent choice for fiberglass and wood hulls, this 8-pin 500 W tra...
This entry-level tilted bronze transducer accommodates deadrise angles of 8 to 15 degrees without a fairing. An excellent choice for fiberglass and wood hulls, this 600 W 8-pin transducer has an op...
This entry-level tilted bronze transducer accommodates deadrise angles of 8 to 15 degrees without a fairing. An excellent choice for fiberglass and wood hulls, this 600 W 8-pin transducer has an op...
Designed for coastal fishing with an operating frequency range of 150-250 kHz. This CHIRP transducer has a constant 25° beam width provides increased coverage under the boat. Designed for boats 25’...
This bronze thru-hull mount transducer works well in deep water. A popular narrow beam, this 8-pin 1 kW transducer has a depth of 1,800 to 2,500 ft; an operating frequency of 50 to 200 kHz; a beamw...
This mid-range 1 kW 8-pin transducer with a narrow beam is good for deep water and bottom definition. It has a depth of 1,500 to 2,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 14...
The AIRMAR® B175M (0° Tilt) transducer has a flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull & can sit on the trailer rollers/bunks.
The AIRMAR® B175M (0° Tilt) transducer has a flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull & can sit on the trailer rollers/bunks.
The AIRMAR® B175M (0° Tilt) transducer has a flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull & can sit on the trailer rollers/bunks.
The AIRMAR® B175L (0° Tilt) transducer has a flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull & can sit on the trailer rollers/bunks.
The AIRMAR® B175L (0° Tilt) transducer has a flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull & can sit on the trailer rollers/bunks.
The AIRMAR® B175L (0° Tilt) transducer has a flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull & can sit on the trailer rollers/bunks.
The AIRMAR® B175HW (0° Tilt) has a flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull & can sit on the trailer rollers/bunks.
The AIRMAR® B175HW (0° Tilt) has a flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull & can sit on the trailer rollers/bunks.
The AIRMAR® B175HW (0° Tilt) has a flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull & can sit on the trailer rollers/bunks.
