The GHP™ 10 marine autopilot system’s patented Shadow Drive technology gives boaters the security of knowing they maintain control even when relying upon the autopilot. Use this Shadow Drive attach...
One of the main components of your autopilot system, the Electronic Control Unit (ECU) controls the actuators based on information received from the Course Computer Unit (CCU).
One of the main components of your Reactor 40 Hydraulic autopilot system, the ECU connects and powers the course computer unit (CCU) and the hydraulic pump, controlling the pump based on informatio...
One of the 5 main components of your GHP Compact Reactor autopilot system, the ECU connects and powers the course computer unit (CCU) and the hydraulic pump, controlling the pump based on informati...
Our CCU is the brain of the Reactor 40 autopilot system, containing sensory equipment used to determine heading and rate of turn. Connect the CCU to the NMEA 2000® network to communicate with your ...
This plastic thru-hull NMEA 2000® smart transducer combines precise depth, speed and temperature signals with attitude sensing for heel/trim and pitch/roll data. It can read depths to 330’ and offe...
Secure your compatible handheld device to any flat surface with this adjustable mount. Screws not included. Box may be marked 'marine mount.' An additional Spine Mount Adapter is required when used...
This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This flush-mounted housing protrudes less than a quarter of an inch out...
This entry-level tilted bronze transducer accommodates deadrise angles of 8 to 15 degrees without a fairing. An excellent choice for fiberglass and wood hulls, this 600 W 8-pin transducer has an op...
This entry-level tilted bronze transducer accommodates deadrise angles of 8 to 15 degrees without a fairing. An excellent choice for fiberglass and wood hulls, this 600 W 8-pin transducer has an op...
Mount your device in your vehicle with this adjustable suction cup mount. Simply suction your mount to the windshield or to the adhesive dashboard disc. Includes suction cup mount, cradle and dashb...
Mount any additional chartplotter on your boat with this second mounting station. Also includes a wiring harness to power your compatible device and connect to an optional NMEA 0183 network, CANet ...
Secure your compatible device to your windshield or any smooth, flat surface with this suction cup mount. An additional Spine Mount Adapter is required when used with the inReach® Mini 2 device. En...
This mid-range 1 kW 8-pin transducer with a narrow beam is good for deep water and bottom definition. It has a depth of 1,500 to 2,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 14...
This bronze thru-hull mount transducer works well in deep water. A popular narrow beam, this 8-pin 1 kW transducer has a depth of 1,800 to 2,500 ft; an operating frequency of 50 to 200 kHz; a beamw...
Connect a thermal camera, underwater lighting or boat stabilizing system to a compatible GPSMAP® series Garmin chartplotter with this PoE (Power over Ethernet) isolation coupler. The coupler provid...
This entry level in-hull transducer with an adjustable deadrise angle makes installation a snap. The 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; ...
Free up your hands to drive the boat, fish, or just enjoy your time on the water. This adjustable marine mount swivels and tilts for optimum viewing and has a locking mechanism to keep your unit se...
Garmin Dual Frequency transducer for use with compatible Garmin fishfinders, providing CHIRP sonar coverage on dual frequencies for versatile underwater imaging.
This plastic transom mount can be used to replace the dual frequency transducers included with many Garmin units. The 500 W 6-pin transducer has a maximum depth of 1,500 ft; an operating frequency ...
Garmin Dual Beam transducer for use with compatible Garmin fishfinders, providing traditional dual-frequency sonar coverage for depth, fish, and bottom detection.
This dual beam transducer replaces the one included with your echo™ or STRIKER™ series fishfinder. A 500 W 4-pin transducer, it has an operating frequency of 77/200 kHz; a beamwidth of 45/15 degree...
This plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls. This 8-pin 300 W transducer has a depth of 900 ft; an operating frequ...
This plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls. This 8-pin 300 W transducer has a depth of 900 ft; an operating frequ...
This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This 8-pin 500 W transducer has a depth of 900 ft; an operating frequen...
